Temperature & air humidity measurement & motion detector
- The u::Lux AddOn MD+RH+TEMP is a motion detector with integrated air humidity and temperature measuring module incl. front plate and mounting material.
- Extends the capabilities of the u::Lux Switch by a motion detector and measures furthermore the relative air humidity and temperature.
- The sensor data is sent to the control directly through the network. Additional sensor inputs at the control are therefore not required.
- This AddOn is connected through a 25cm long 4-pole cable (included in the scope of delivery) to the u::Lux Switch.
- installation dimensions: 55mm x 55mm x 20mm
- temperature measurement (-55°C - +125°C)
- air humidity measurement (0% until 100% - non-condensing)
- motion detector (range approx. 5m.)
- configurable RGB-LED for displaying the control status (active/inactive)
u::Lux AddOns Manual
The assembly of the u::Lux AddOns is always done near a u::Lux Switch. The best results have been achieved with the use of two single-flushmountings assembled below each other or one double-flush-mounting in which the
u::Lux Switch with the u::Lux AddOn is mounted and a double frame is attached. The u::Lux AddOn is connected to the u::Lux NetLink with the supplied cable (approx. 25cm).