Power supply

The NetCon Power serves as power supply for up to 20 u::Lux Switches RJ45 (2 lines with each 10 pieces.).
top-hat rail installation
requires 24V DC
It’s a real 4-port Ethernetswitch with 100MBit. 2 of the ports are used for the connection and the energy supply of the u::Lux Switches RJ45.
The 2 remaining ports are used to establish further communication connections (e.g. to the control and to the configuration PC) or they can be used for cascading additional NetCon Power.

Appropriate u::Lux Switch: u::Lux Switch RJ45

Further information: Net Con Power Manual

double injector (Attention: No Ethernetswitch!)
Through 2 Ethernet lines the NetInj Power supplies up to 20 u::Lux Switches RJ45 (2 lines with each 10 pieces) with energy.
top-hat rail installation (REG)
requires 24V DC
Each Ethernet line has one input and one output.
The outputs serve to connect the u::Lux Switches RJ45.
May require a separate Ethernetswitch to establish the communication connections to the control and to the configuration PC.

Appropriate u::Lux Switch: u::Lux Switch RJ45

Further information: NetInj Power Manual

Any PoE Switch (min. class 1) can be used as supply for the u::Lux Switch LSA/IDC.
We recommend using the levelOne products FEP-0800 (8-Port) and FEP-1600 (16-Port).

Appropriate u::Lux Switch: u::Lux Switch LSA/IDC

Daisy-chain wiring